Innovative product concepts featuring a cohesive design language defined by soft silhouettes and warm finishes. Subtle metallic accents across the entire range allow for either a harmonious match or a bold contrast within a wide spectrum of colours.

Available in:
Wood, e-17mm.
Anti-fingerprint HPL, e-17mm.
Melamine, e-17mm.
WOOD / ANTI-FINGERPRINT HPL
Birch plywood core with varnished edges.
Fixed with a double 3 mm steel sheet bracket and anchored to the desktop with
two M6 screws.
MELAMINE
Chipboard core with melamine finish and ABS edges.
Fixed with a double 3 mm steel sheet bracket and anchored to the desktop with
two M6 screws.

Desktop

Lightweight board with a birch core: 60 mm thick for Executive desks and 30
mm thick for Managerial desks.
The desktop is equipped with M8 metal inserts for leg attachment and M6 metal
inserts for the modesty panel.
Wood finish: 0.5 mm wood veneer with a high-resistance varnished treatment on
both top and bottom faces, and 2 mm thick varnished wood edges.
HPL/Linoleum finish: 0.7 mm anti-fingerprint HPL or 2 mm linoleum on the top
face, with black HPL on the bottom face, and 2 mm thick varnished wood edges.

Legs

Wooden petal-shaped legs: MDF core with an outer layer of oak wood. Varnished
finish. Leg thickness: 14 mm.
Each leg features a 4 mm steel sheet top plate. This plate is secured to the leg via a
three-bolt M6 nut-and-screw system and fixed to the desktop with four M8 screws.
Plastic glides with felt pads.
One of the two legs can be rotated if the desk is supported on one side, provided
it is not on the electrification side (see technical drawing). *
Metallic petal-shaped legs (Managerial desks only): Solo para mesas de media
dirección.
Welded assembly consisting of 2.5 mm formed sheet metal uprights. Top rib (4
mm thick) for anchoring to the desktop with four M8 screws per leg, and bottom
rib (4 mm thick) housing M8 levelling feet with a 10 mm adjustment range.